UHMW Snow Plow Blades

Posted: January 19, 2017 in UHMW
Tags: , , , , , ,

UHMW polyethylene has countless applications for the DIY community but as we head into winter there is one simple application that we have to highlight on this blog. That is the UHMW plow blade for snow plows. Let’s not over-complicate things: this is just a UHMW strip with some holes drilled in. But in order to get what you need, you need to know what to ask for! First of all know that the material you likely want is the reprocessed-black UHMW grade. While being less expensive than the natural grade, the cross-linking in its production actually improves wear properties. A nice bonus when you’re also saving some money.

You also need to know what thickness of blade you want. In general, the blades are almost always 1″, 1.5″ or 2″ thick with 1.5″ being the most common. If you don’t know what you need, pick 1.5″. Many plastic companies will pre-drill holes for you if you need them for a fee (usually about $80.00) but we would recommend you do not. Firstly to save money, secondly you need to remember that UHMW is not a dimensionally stable plastic. Changes in temperature may expand the blade from when the holes were drilled meaning by the time you get it – the holes don’t line up! To avoid disappointment we recommend you do the drilling if at all possible.

If you have questions about UHMW snow plow blades please contact us.

SAMSUNG

SAMSUNG

Advertisements

Comments are closed.