FRP Wall Panel: 3 Questions To Ask Before You Start Your Project

Posted: April 6, 2017 in FRP Wall Panels
Tags: , , ,

FRP wall panels are a great project for the DIY enthusiast. These panels come in 4′ x 8′ or 4′ x 10′ size, usually in white with a “pebble-embossed” surface. They provide wall protection and are designed to be easy to clean (non-porous surfacing and the pebble texture helps with that). But before you start you need to get the project in order. Here are the questions you need to ask yourself:

1.) Do you have the right amount of dividers (j-trims) and inside/outside corners?

This should be common sense but when you buy the panels you need to get the plastic dividers too! J-trims divide the panels that are side-by-side, while the inside and outsider corners link at, you guessed it, the corners. Knowing the room(s) you’re working on and the size of the panels will help you determine what you need.

2.) Do you have the right amount of adhesive?

What we mean here is the special FRP glue. If you’re fixing the panels another way than obviously you don’t need to think about this but most people do use the adhesive and each bucket (4 gallons) covers 200 square feet. We usually recommend you buy a little extra to ensure you can spread the adhesive liberally. It just takes a minute or so of simple math.

3.) Is the surface clean?

Just because FRP wall panels have a special adhesive does not mean it’s so strong that you just slather it on any surface and slap the panels on. Even though the panels can be affixed to a wide variety of surfaces (including concrete!) The surface still needs to be clean. This means “clean, clean” so deburr it or sand it flat than wash the surface clean and let it fully dry before attaching the panels. Failure to do this could mean the panels do adhere properly or even detach. You would think it makes common sense but people don’t always do it.

Asking yourself those three simple questions will go a long way in ensuring your project is a complete success!

frp-wall-ceiling

Advertisements

Comments are closed.